What you have to do is to erase the existing memory in the Parrot. To do this, turn the key on and then hold down the red and green buttons on the Parrot controller at the same time. The English lady said "erasing memory." Then, she said "pair a device." At that time, my IPhone paired w/o any issues, and the system works great. Parrot CK3100 Car kit. My phone updated to the latest software release. Now it doesn't work properly with my bluetooth car kit. It used to be that when I pushed the green button on my car kit I'd hear an american ladys voice asking me to speak the contact name. (I think thats the Parrot built-in functionality and uses the contact list stored in 2. Go to the Bluetooth settings on your Samsung A50 and search for available devices. 3. Select the Parrot CK3100 from the list of available devices. 4. Enter the code "0000" or "1234" when prompted. 5. If the connection cannot be established successfully, reset the Parrot CK3100 by briefly touching the central button and selecting the Once the Parrot's firmware has been updated, this should be resolved. The final point of not is that when you turn off your ignition, 'GOODBYE' should be displayed on your Parrot's control screen. If it is not, Swap the 12V constant and Ignition lives around using the fuse holders on the parrot. The mute wire from the Etadyne kit goes to the yellow mute wire on the Parrot harness. The speaker +- wires from the Etadyne kit go to one of the Parrot's harness speaker outputs. I chose the front-right speaker outputs, but I don't think the choic The difference between the CK3100 and the CK3000 is the display panel. From the install diagrams I have seen, this would make no difference at all in the wiring of the unit - the display unit replaces the little 2-button unit that the CK3000 has. thanks for the reply , looks like I have forgotten to attach the mute wire on the multican , although it is connected on the ck3100 itself. Apparently quite a commom installation problem Fitted a Pro head unit today and connected the Mute from multican to parrot and head unit - all now works fine It was just the mute not connected via multican Jim Important details: connections for Parrot CK300 and CK 3100 are different! In addition, RS232 lead masses are not connected to the power ground, so you should make these connections exactly according to the scheme, without omitting any. Then download Parrot_Software_update_Tool to your computer. 413 posts · Joined 2005. #1 · May 18, 2007. OK, you electronic geniuses, I need your help! Radio display does not come on, and of course, does not turn on. I have checked the two radio fuses on the side of the dash (and I hear the CD motor briefly activate when the 42 fuse is replaced, so I know the radio's getting some sort of power), and Truxedo Lo-Pro, Parrot CK3100 Bluetooth Hands-Free Speakerphone, Power Tailgate Lock, Zoomers Cannon Exhaust Tip, DEI 561T Remote Start, Line of Fire LED light bar, Backup Camera displayed on nav. screen EBC Greenstuff pads & rotors, Aux. back-up lights, Wade In-Channel vent visors, keypad entry NpmYFL.